What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 25.06.2025 00:11

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
There are three different concepts here that are getting confused.
How do I find a transgender girlfriend?
[old diagram got deleted by accident]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
At one ohm, the resistor has a maximum of 1 watt power.
MLB investigating abuse claims from Giants pitcher’s wife - KRON4
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
He then describes the function of a fuse.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
‘Razor Blade Throat’ Symptoms As ‘Nimbus’ COVID-19 Variant Spreads - Forbes
What is lightning?
It seems Mohan does not understand the difference between a comment and an Answer.
This is where the MOV conducts again, and dissipated the energy.
One
He then describes Rainy Season and Lightning.
2024–10–14 [Omar Gharbi Omar Gharbi ]
A Major American Egg Farm Just Lost 90% of its Chickens - Bloomberg
This is the picture of an electronic coil of wire wound around a core of magnetic material.
The bolt then partially travels down the line to your home.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
NASA Pulls the Plug on Europa Lander, but Scientists Propose a Plan B - Gizmodo
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Upvotes:
This is where this question deviates from being a 'generic' question, and becomes more specific.
What do you love doing for fun?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
The other is “what does a “fuse” do?”
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Does Trump have the authority to order U.S. strikes on Iran? - PBS
The MOV will conduct when the voltage exceeds 50% of line voltage.
These are simplified answers to the original question, and does not change anything I wrote above.
This one hit behind the barn.
but this device (an Inductor) … impedes the rapid changes in the current.
One is “what exactly is in a ‘surge protector’ ? ”
Here is a simplified AC power diagram.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
He then asserts :
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
This device then solves the entire problem.
But it can get overloaded, and no longer works.
An AC voltage/ current source, and an ac inductive load.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Rocks reveal the turning point when oxygen changed Earth forever - Earth.com
Because the load is inductive, the current lags the voltage.(by a bit).
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Why are Trump supporters so incredibly stupid?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Rossendale man 'did not know what was wrong until I got NHS text' - BBC
A circuit breaker is similar, but is resettable.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
(Dc diagram shown, AC is similar).
nine
2024–10–16 [ OO OLAOYE OYEBODE ]
I post the exact comment here.
the problem then depends on "how fast does the fuse operate?".
2024–10–10[John johnson John Johnson ]
but I think this circuit , shows a few more pieces.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
The third is lightning and “how it gets conducted into a home.”
This is 'the assistant's answer'
There are two important concepts here.
a photo is worth a thousand words.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
what exactly is a ‘surge’ protector?
Edit 2024–10.
What does a fuse do?
At least they know the answer if they wanted it.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
These devices are installed between the “hot” and “neutral” and protective ground.
First Sentence:
eight
[image of Common-mode choke]
For this case there are devices called Metal oxide varistors (MOV).
Now when you have a certain ac resistance, then a current flows in a loop.
Barnstars:
so, what happens?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
It also is a device that limits the change in current flow.
In schematic diagrams this is the symbol for a fuse:
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
A fuse is a non-resetable over current circuit protector.
But… the neutral is now “floating” because of the 1 ohm resistance.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
So, the voltage could go up to 500 volts, and the fuse will not open up.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).